WL1835MODGBMOCR (Actual spot inventory)

Short Description:

Boyad  Part Number:296-38032-2-ND – Tape and Reel (TR)   296-38032-1-ND – Shear Tape (CT)   296-38032-6-ND – Digi-Reel® Custom Tape and Reel

manufacturer:Texas Instruments

Manufacturer product number:WL1835MODGBMOCR


Original factory standard delivery time:35 weeks

Detailed Description:Bluetooth, WiFi 802.11b/g/n, Bluetooth 4.2 RF Transceiver Module 2.4GHz Surface Mount

Customer Internal Part Number

Product Detail

Product Tags

product properties:

category RF/IF, RF/IF and RFID  RF Transceiver Modules and Modems
manufacturer Texas Instruments
series WiLink™
Package Tape and Reel (TR)  Shear Band (CT)  Digi-Reel® Custom Reel
product status in stock
RF Series/Standard Bluetooth, WiFi
protocol 802.11b/g/n, Bluetooth 4.2
modulation CCK, DSSS, GFSK, OFDM
frequency 2.4GHz
data rate 54Mbps
power - output 17.3dBm
Sensitivity -96.3dBm
serial interface SDIO, UART
Antenna type -
IC/Parts used -
storage -
Voltage - Powered 2.9V ~ 4.8V
Current - receive 49mA ~ 85mA
current - transmission 238mA ~ 420mA
installation type Surface Mount Type
Operating temperature -20°C ~ 70°C
Package/Enclosure module
Basic product number WL1835

Environment and Export Classification:

RoHS status Compliant with ROHS3 specification
Moisture Sensitivity Level (MSL) 3 (168 hours)
REACH status REACH information available upon request
HTSUS 8517.62.0090

General characteristics:
1 Features
• General
– Integrates RF, power amplifiers (PAs), clock,
RF switches, filters, passives, and power
– Quick hardware design with TI module
collateral and reference designs
– Operating temperature: –20°C to +70°C
– Small form factor: 13.3 × 13.4 × 2 mm
– 100-pin MOC package
– FCC, IC, ETSI/CE, and TELEC certified with
PCB, dipole, chip, and PIFA antennas
• Wi-Fi®
– WLAN baseband processor and RF transceiver
support of IEEE Std 802.11b, 802.11g, and
– 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO
at 2.4 GHz for high throughput: 80 Mbps (TCP),
100 Mbps (UDP)
– 2.4-GHz MRC support for extended range
– Fully calibrated: production calibration not
– 4-bit SDIO host interface support
– Wi-Fi direct concurrent operation (multichannel,
• Bluetooth® and Bluetooth low energy
(WL183xMOD only)
– Bluetooth 5.1 secure connection compliant and
CSA2 support (declaration ID: D032799)
– Host controller interface (HCI) transport for
Bluetooth over UART
– Dedicated audio processor support of SBC
encoding + A2DP
– Dual-mode Bluetooth and Bluetooth low energy
– TI's Bluetooth and Bluetooth low energy
certified stack
• Key benefits
– Reduces design overhead
– Differentiated use cases by configuring
WiLink™ 8 simultaneously in two roles (STA
and AP) to connect directly with other Wi
Fi devices on different RF channel (Wi-Fi
– Best-in-class Wi-Fi with high-performance
audio and video streaming reference
applications with up to 1.4× the range versus
one antenna
– Different provisioning methods for in-home
devices connectivity to Wi-Fi in one step
– Lowest Wi-Fi power consumption in connected
idle (< 800 µA)
– Configurable wake on WLAN filters to only
wake up the system
– Wi-Fi and Bluetooth single antenna coexistence
2 Applications
• Internet of things (IoT)
• Multimedia
• Home electronics
• Home appliances and white goods
• Industrial and home automation
• Smart gateway and metering
• Video conferencing
• Video camera and security
3 Description
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi® and
Bluetooth® coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz
module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers
drivers for high-level operating systems such as Linux® and Android™. Additional drivers, such as WinCE and
RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.

  • Previous:
  • Next:

  • Leave Your Message

    Related Products


    Leave Your Message