product properties:
| TYPE | DESCRIBE |
| category | Integrated Circuit (IC) Embedded - Microcontrollers |
| manufacturer | NXP USA Inc. |
| series | MPC56xx Qorivva |
| Package | tray |
| product status | in stock |
| core processor | e200z650 |
| Kernel specification | 32-bit single core |
| speed | 116MHz |
| Connectivity | CANbus，I²C，LIN，SCI，SPI |
| Peripherals | DMA ， POR ， PWM ， WDT |
| Number of I / O | 155 |
| Program storage capacity | 2MB（2M x 8） |
| Program memory type | flash |
| EEPROM capacity | - |
| RAM size | 128K x 8 |
| Voltage - Power Supply (Vcc/Vdd) | 3V ~ 5.5V |
| data converter | A/D 64x10b |
| Oscillator Type | internal |
| Operating temperature | -40°C ~ 125°C (TA) |
| installation type | Surface Mount Type |
| Package/Enclosure | 208-BGA |
| Supplier Device Packaging | 208-BGA（17x17） |
| Basic product number | SPC5668 |
Environment and Export Classification:
| ATTRIBUTES | DESCRIBE |
| RoHS status | Compliant with ROHS3 specification |
| Moisture Sensitivity Level (MSL) | 3 (168 hours) |
| REACH status | Non-REACH products |
| ESCAPE | 3A991A2 |
| HTSUS | 8542.31.0001 |
MPC5668x features:
• 32-bit CPU core complex (e200z650)
– Compliant with Power Architecture embedded category
– 32 KB unified cache with line locking and eight-entry
store buffer16
– Execution speed static to 116 MHz
• 32-bit I/O processor (e200z0)
– Execution speed static to 1/2 CPU core speed (58 MHz)
• 2 MB on-chip flash
– Supports read during program and erase operations, and
multiple blocks allowing EEPROM emulation
• 512 KB + 80 KB (592 KB) on-chip ECC SRAM
(MPC5668G)
• 128 KB on-chip ECC SRAM (MPC5668E)
• 16-entry Memory Protection Unit (MPC5668E only)
• Direct memory access controller
– 16-channel on MPC5668G
– 32-channel on MPC5668E
• Fast ethernet controller
– Supports 10-Mbps and 100-Mbps IEEE 802.3 MII,
10-Mbps 7-wire interface
– IEEE 802.3 MAC (compliant with IEEE 802.3 1998
edition)
• Media Local Bus (MLB) interface (MPC5668G only)
– Supports 16 logical channels, max speed 1024 Fs
• Interrupt controller (INTC) supports 316 external interrupt
vectors (22 are reserved)
• System clocks
– Frequency-modulated phase-locked loop (FMPLL)
– 4 – 40 MHz crystal oscillator (XTAL)
– 32 kHz crystal oscillator (XTAL)
– Dedicated 16 MHz and 128 kHz internal RC oscillators
• Analog to Digital Converter (ADC) module
– 10-bit A/D resolution
– 32 external channels
– 36 internal channels (MPC5668G)
– 64 internal channels (MPC5668E)
• Cross-Triggering Unit (MPC5668E only)
– Internal conversion triggering for ADC
– Triggerable by internal timers or eMIOS200
• Deserial Serial Peripheral Interface (DSPI)
– Four individual DSPI modules
– Full duplex, synchronous transfers
– Master or slave operation
• Inter-IC communication (I2 C) interface
– Four individual I2 C modules
– Multi-master operation
• Serial Communication Interface (eSCI) module
– Two-channel DMA interface
– Configurable as LIN bus master
• eMIOS200 timed input/output
– 24 channels, 16-bit timers (MPC5668G)
– 32 channels, 16-bit timers (MPC5668E)
• Controller Area Network (FlexCAN) module
– Compliant with CAN protocol specification, Version
2.0B active
– 64 mailboxes, each configurable as transmit or receive
• Dual-channel FlexRay controller
– Full implementation of FlexRay Protocol Specification
2.1, RevA
– 128 message buffers
• JTAG controller (MPC5668G only)
– Compliant with the IEEE 1149.1-2001
• Nexus Development Interface (NDI)
– Available in 256 MAPBGA package only
– Compliant with IEEE-ISTO 5001-2003
– Nexus class 3 development support on e200z650
– Nexus class 2+ development support on e200z0
• Internal voltage regulator allows operation from single
3.3 V or 5 V supply
